NDR ROI Analysis for Enterprise Security Teams: What the 2026 Numbers Actually Show

Tags:

Every security leader eventually gets the same question from the CFO: what do we get back for what we spend on detection tools? For network detection and response, the old answer used to be “fewer bad days.” That doesn’t survive a budget meeting anymore, and honestly, it shouldn’t have for a while.

If you’re evaluating NDR, you probably don’t need another explanation of why network visibility matters. You need to know whether a given platform will save enough analyst time, cut enough operational overhead, and provide enough investigation context to justify the spend, and whether that holds up better than a competing architecture would. NDR ROI comes down to what a platform can actually see and how much context it hands an analyst afterward. Flow-only telemetry can tell you two hosts talked to each other; deeper inspection gives an analyst evidence to investigate, hunt with, and act on. That distinction shows up financially in investigation time, analyst workload, how long metadata needs to stick around, and how many separate tools a SOC has to keep running.

This piece runs the actual math using 2026 data from IBM, Verizon, Ponemon, and ISC2, works through a sample ROI calculation, and looks at where Fidelis Network®‘s architecture changes the return relative to a flow-only approach.

The Cost of Not Having Network Visibility

Start with what an organization is already paying, whether or not it shows up as a line item.

Breach costs keep climbing. The global average cost of a data breach[1] reached $4.99 million in 2026, a 12% increase year over year, driven largely by higher detection, escalation, and lost-business costs tied to AI-enabled attacks. AI-driven breaches specifically rose 56% and now average $6 million each.

Speed is still the variable that moves that number most. IBM’s research has put the average breach lifecycle at around 241 days, roughly 181 to identify and 60 to contain, a figure that’s held fairly steady across recent report cycles. Organizations leaning heavily on AI and automated response capabilities in their security operations reduced breach costs by close to $2 million on average compared with organizations using none. Every extra day a threat goes unnoticed adds to that total.

Attackers are increasingly exploiting software vulnerabilities and third-party relationships rather than relying solely on stolen credentials. The 2026 Verizon Data Breach Investigations Report[2], built on more than 22,000 confirmed breaches, found vulnerability exploitation became the leading breach entry point, and third-party or supply-chain involvement jumped 60% year over year to touch 48% of breaches. Both trends reinforce the need for visibility beyond the endpoint: exploited vulnerabilities and abused third-party connections can generate network activity that endpoint-focused controls may not fully contextualize.

Insider activity and lateral movement are a hidden line item too. The 2026 Ponemon Institute Cost of Insider Risks study[3] found average annual insider risk cost hit $19.5 million, up from $17.4 million the year before, with credential-theft incidents averaging $842,462 each. Most of these incidents involve someone moving across internal network traffic they don’t normally touch, so containment speed swings the cost hard: incidents contained inside 30 days averaged $14.2 million in annual organizational cost, versus $21.9 million once containment stretched past 90 days. That gap alone is the financial case for watching internal networks, not only the perimeter.

Encrypted traffic hides a lot of this too. Nearly all web traffic is encrypted now, and because encrypted traffic dominates enterprise network environments, attackers increasingly hide malicious activity inside SSL/TLS sessions specifically to dodge tools that stop inspecting at the edge of encryption. A detection approach that can’t see inside those sessions is missing a real slice of what’s crossing the wire.

Staffing shortages make everything above harder to manage. ISC2’s most recent workforce research[4] found that critical skills gaps, not headcount alone, are now the binding constraint on security operations, and organizations with significant skills gaps are nearly twice as likely to suffer a material breach. Fewer people means every hour a security analyst loses to a false positive is an hour not spent on something real.

Where NDR ROI Comes From

NDR earns its budget in five places. Each one ties back to a cost the organization is already absorbing, even if finance doesn’t track it as an NDR line item.

Faster detection and response

Continuous monitoring of network traffic, paired with machine learning and behavioral analytics that model normal network behavior, lets a platform identify anomalies and flag network events without waiting on a matching signature. Shrink the identify-and-contain window and you lower the average cost of every incident, since faster resolution correlates with lower total costs across both IBM’s and Ponemon’s research.

Real-Time Insight, Real-Time Prevention with Fidelis Network

Fewer false positives, less wasted analyst time

Microsoft and Omdia’s State of the SOC 2026 research found that 46% of all security alerts turn out to be false positives, and the 2025 SANS Detection and Response Survey[5] found 73% of security teams name false positives their single biggest detection challenge. Correlating related alerts into one validated incident cuts that noise at the source.

Visibility endpoint tools structurally cannot provide

Endpoint detection only sees managed devices, with no line of sight into unmanaged devices, IoT, or OT gear. Network traffic analysis, working from raw network packets rather than agent data, can provide visibility into those unmanaged devices and environments that may not support an agent at all, which is exactly the blind spot SANS’s 2025 survey flagged in organizations leaning too heavily on endpoint-only detection.

Insider threat and lateral movement detection

Once someone is inside, the next moves are internal network traffic: scanning, credential reuse, unusual remote access, control communications trying to phone home, sometimes stretched out over months in the pattern typical of advanced persistent threats. Organizations that contained insider incidents within 30 days reported roughly $7.7 million less in annual organizational cost than those taking more than 90 days, which makes catching lateral movement early one of the more directly quantifiable ROI levers a security team has.

Encrypted traffic and hidden threats

With most web traffic now encrypted, sophisticated attacks increasingly hide inside encrypted network traffic to evade tools that stop inspecting at the edge of TLS. Deep packet inspection and metadata-based analysis catch what’s exposing sensitive data inside those sessions without needing plaintext content every time.

These five drivers don’t come free with every architecture. Some NDR solutions rely mostly on flow telemetry, lighter to run but thinner for an analyst mid-investigation. Others add deeper packet inspection and full content analysis, hold richer metadata longer, and pair detection with correlated, evidence-backed alerts instead of a raw feed. That difference shows up directly in investigation time and in how much of the ROI modeled on paper survives contact with production traffic.

Example: What the Savings Look Like

Numbers land better than formulas do. Here’s a simplified calculation an enterprise security team can rebuild with its own inputs; the figures are illustrative, not a published benchmark, since actual results shift with traffic profile and tuning.

Assume a mid-size SOC running eight analysts, fielding 1,200 network-related alerts a week, with roughly 46% turning out to be false positives, matching the industry figure cited above. This example assumes correlation and behavioral analysis bring that rate down to somewhere near 25%. The post-NDR values below are scenario assumptions built to illustrate the model, not Fidelis performance benchmarks or figures from any published study.

MetricBefore NDRScenario after NDRNotes

Weekly network alerts1,200~700 correlatedCorrelation cuts what an analyst has to individually reviewFalse-positive rate46%~25% (Note: It’s just an example)Behavioral correlation and session context reduce mistriageAnalyst hours on triage/week320210Scenario assumption based on modeled analyst workload, not derived from the alert counts above; replace with your team’s measured triage timeHours freed up/week-110Redirected to investigation and proactive threat huntingLoaded analyst hourly cost$85$85Sample blended rate; swap in your ownWeekly labor value freed-$9,350110 hours x $85Annualized labor value-~$486,00052 weeks, before PTO or holiday adjustments

The point isn’t that every organization will free exactly 110 analyst hours a week. The point is that NDR ROI can be modeled using three numbers you already have: alert volume, false-positive rate, and loaded analyst cost. Replace the assumptions above with your own, then weigh the resulting labor value against each vendor’s license and operating costs before you take anything to finance. That’s the comparison that actually decides a procurement decision, not a vendor’s headline detection claim.

Deployment Economics: What it Costs to Run

ROI isn’t only about the license. It’s about what it takes to keep the platform running month after month, and that’s usually where a business case quietly falls apart six months in.

Is it delivered as an on-premises appliance, a virtual machine, a cloud subscription, or some blend of the three? Sensor-based deployments typically place hardware or virtual sensors at ingress and egress points and at key internal segments, then centralize analysis and storage elsewhere. Cost has at least three moving parts because of that: sensor count and placement, how long metadata gets retained, and the compute needed to run detection at line rate across your network infrastructure.

Storage duration matters more than most buyers assume going in. Retrospective analysis, going back through historical metadata once new threat intelligence surfaces, only works if that metadata is still around. Retention windows that are too short quietly erase the value of retrospective detection before it ever pays off.

Maintenance and patching are the recurring cost most ROI models leave out entirely. On-premises deployment means your team owns updates, tuning, and uptime, indefinitely, on top of everything else on the calendar. A cloud-delivered model shifts that operational load onto the vendor, which changes the labor side of the equation even when the license line looks similar on paper. Watch pricing structure closely, too: some cloud NDR pricing scales with the number of sensors deployed, which can work against an organization that’s expanding coverage. Pricing tied to protected bandwidth and retention days instead may be easier to forecast as the network grows, since it tracks what’s actually being protected rather than how many boxes had to go up to protect it.

How Fidelis Network® Changes the ROI Equation

Here’s what that architecture difference looks like in an actual product, organized around the financial questions a buyer actually needs answered rather than a feature list.

How much investigation work is still left for the analyst?

Fidelis Network® uses patented Deep Session Inspection to provide deep visibility into complete network communications and inspect embedded, compressed, and obfuscated content, across all ports and protocols, rather than sampling flow records. It also supports packet capture and real-time Layer 7 analysis and collects over 300 metadata attributes well beyond typical flow-based telemetry. That’s more investigation context available in the same platform, which can reduce the amount of manual reconstruction an analyst has to do before an investigation even starts, rather than a guaranteed reduction in hours.

How much of that context arrives already correlated?

Fidelis Network® is built around aggregated alerts, context, and evidence rather than a raw alert feed. The platform automatically validates, correlates, and consolidates related network alerts into a single view instead of leaving an analyst to piece together suspicious activity from a dozen separate notifications. This is the mechanism the worked example above is pricing in. NDR ROI isn’t determined by detection alone; it’s determined by how much analyst work happens after detection, and aggregated, evidence-backed alerts are the lever that cuts that work down.

How many separate tools do you need to operate?

Fidelis Network® bundles sandboxing, DLP, threat intelligence, and network forensics into one platform with alerts mapped against the MITRE ATT&CK framework, instead of requiring separate point tools for each capability. Consolidating those capabilities into one platform can reduce the number of separate tools, consoles, and integrations a team has to operate day to day, though the actual reduction depends on what a given team already runs.

How do you handle encrypted web traffic?

The Fidelis Web Sensor integrates over ICAP and S-ICAP with proxies and network devices that already decrypt traffic for other purposes, and can redirect policy-violating sessions to an informative page instead of dropping them outright. Because the Web Sensor can receive that decrypted content directly from a compatible proxy, organizations can inspect proxied encrypted web traffic without deploying a separate decryption server just for the Web Sensor.

Who owns the infrastructure as the network grows?

Fidelis Network® Cloud prices on two variables: aggregate peak protected bandwidth and days of metadata retention, which organizations with rapidly expanding environments may find easier to forecast than per-sensor pricing. Fidelis manages the hosted infrastructure itself, including software updates, patches, monitoring, and support, while the customer retains responsibility for positioning sensors, managing alerts, and maintaining custom policies. That’s less infrastructure to operate, not zero operational responsibility.

Each point above answers a question raised earlier: where the investigation-time savings come from, why the labor math in the worked example holds up, and why the deployment-cost side can be easier to forecast as the network scales.

Fitting into the Stack You Already Have

A platform doesn’t operate in isolation, though. NDR ROI depends heavily on how cleanly a platform integrates with the security information and event management (SIEM) and security orchestration, automation, and response (SOAR) tools already running in a security operations center, plus the EDR handling the endpoint side of things. A platform that leans on manual response capabilities for every action, instead of feeding automated response into an existing playbook, adds staffing overhead that eats into the labor savings modeled above. Seamless integration with what a team already owns is often a bigger factor in improving security posture than any single detection feature, because it decides whether alerts turn into faster response or just pile up in yet another queue nobody has time to watch.

A Checklist Before You Buy

This is the part worth taking into a vendor evaluation directly. Enabling security teams to actually use what a platform detects, not just adding another feed of potential security threats, is the real test. Whatever platform you’re comparing, get direct answers to these before finalizing an ROI model:

Run these against any platform, including Fidelis Network®, and score the answers against the labor-value model from the worked example above. That comparison, not a feature list, is what should decide the purchase.

Unlock Powerful Network Security with Fidelis NDR
See how Fidelis NDR boosts security with:

The Bottom Line

NDR ROI comes down to what happens after detection as much as detection itself. A platform that surfaces aggregated alerts with context and evidence, rather than raw signals an analyst has to piece together, is the difference between a labor-savings model that holds up in production and one that only worked on a slide deck.

Build your NDR business case with your own alert volume, analyst costs, protected bandwidth, and retention requirements. See how Fidelis Network® maps those inputs to a deployment and ROI model for your environment.

Frequently Asked Questions

How is NDR different from a firewall or IPS for ROI purposes?

Firewalls and IPS make allow-or-block decisions mostly at the perimeter and lean on known threat signatures. NDR catches anomalies in normal network behavior after traffic is already inside, exactly where lateral movement, insider activity, and post-compromise behavior happen. The ROI comes from catching what perimeter tools structurally can’t see.

Can NDR replace endpoint detection and response instead of adding to the budget?

No, and treating it that way undersells both. EDR sees managed-device activity; NDR sees everything crossing the network, including unmanaged devices and IoT. The stronger case treats them as complementary layers feeding one response workflow, not competing line items on the same budget.

How long does it typically take to see ROI from an NDR deployment?

Labor-efficiency ROI can be measured once a deployment has established a reliable baseline for alert volume, false-positive rates, and analyst triage time, so track those three from day one rather than waiting to evaluate the platform. Breach-cost-avoidance ROI takes longer to demonstrate, since it depends on incidents that don’t happen, which is exactly why a labor-savings model like the one above is worth building up front rather than after the fact.

Does NDR ROI hold up for organizations that already inspect TLS at the proxy or firewall?

Yes, often more so. If a compatible web proxy already decrypts traffic, Fidelis Web Sensor can receive that decrypted content over ICAP/S-ICAP for inspection, which gets full content visibility without adding a second decryption point, usually cheaper than layering separate TLS inspection into every new tool added afterward.

What’s a reasonable false-positive reduction target to build into an ROI model?

There isn’t a universal target. Industry benchmarks put the baseline false-positive rate near 46%, but the right reduction to model depends on your current tooling, tuning maturity, and traffic profile. Use your own current rate as the baseline, then model one or more improvement scenarios, the way the worked example above uses a 25% scenario, rather than assuming a fixed post-NDR number as an industry standard.

The post NDR ROI Analysis for Enterprise Security Teams: What the 2026 Numbers Actually Show appeared first on Fidelis Security.

Categories

No Responses

Leave a Reply

Your email address will not be published. Required fields are marked *